UL 1500W Immersion Water Heater Reusable

1500W IMMERSION HEATING This 1500W immersion water heater uses an upgraded magnesium oxide heating element for efficient heating. The open-slot protective guard helps improve water circulation for better heat transfer. Heats 5 gallons of water from 68 F to 83 F in about 8 minutes. Heating time may vary by water volume, starting temperature, and conditions. DURABLE BUILD, STABLE CONNECTION Our portable water heater is made with 316L stainless steel material, making it better suited than 304 stainless steel for repeated water immersion. It helps resist rust and corrosion, supporting a longer service life. The heater measures 11 in long and includes a 79 in power cord, providing 90 in total length when fully extended. The NEMA 5-15P plug improves outlet compatibility and helps provide a stable connection during use. SAFE 5-STEP USE Add enough clean water to keep the water level at least 2 in / 5 cm above the heater. Fully submerge the heating section before plugging in. Do not touch the heater or place hands in the water while heating. Use the thermometer to monitor water temperature and heating time. After use, unplug first and allow the heater to cool before removing it from the water. DIGITAL TEMPERATURE MONITOR This immersion water heater includes a separate thermometer to help you check water temperature during heating. Simply place the probe into the water when using it in a bathtub, bucket, or small inflatable pool, so you can monitor the current temperature without guessing. DEDICATED POWER FOR STABLE HEATING Each heater must be plugged into a separate 120V / 15A or higher-rated outlet. Do not plug two heaters into the same outlet. Avoid using power strips or extension cords. If using multiple heaters, connect each one to its own dedicated outlet.