IV Pole with Wheels 47 100In Infusion Stand

Pulley IV Holder This IV Pole has a pulley base and the wheels can rotate 360 degrees for easy movement. IV stand pole with wheels with locking function, when you hang the IV bag and don't need it to move, press the close button to lock the four wheels, not easy to slide and dump. Portable iv pole have good stability and smooth transportation 4 Infusion Bag Holder Hook The infusion floor stand can be used for 4 infusion objects at the same time, strong load-bearing capacity, can hang 22 lbs infusion bag, infusion bag holder tube diameter, stainless steel material is not easy to break and damage, iv pole with wheels suitable for long-term use, durable, lightweight and portable! Height Adjustable According to Your Needs The height of the telescopic IV stand can be adjusted at will, if you install all the tubes, the adjustment range is 73 to100inches.If you need a shorter size, you just need to remove one or two tubes and connect the hook bar, feeding pump stand will satisfy your adjustable height from 47 to 73inches. Ensure continuous, uninterrupted infusion and medication delivery while lying in bed or in a wheelchair! Multi-purpose Use IV pole with wheels is not only suitable for home use, hospitals used to hang infusion bags for infusion, but also suitable for hanging items, also suitable as a tool for school skills testing, feeding tube stand also suitable for hanging water bags used to give a bath to people who are not feeling well. Infusion Portable IV Pole not only suitable for human use, but also suitable for small and medium-sized dogs, cats infusion, suitable for cat and dog shelters and pet stores. Convenient to Carry and Store In order to prevent our portable iv poles for travel from being damaged during transportation, we use parts packaging for transportation, at the same time,iv pump parts packaging also saves your storage space as well as easy to disassemble and carry when you go out of town. IV Stand Floor Easy Installation First install the pulley base, find the pulley bar with label 1 as the bottom bar, another pulley bar on the pulley bar with label 1, align the round hole in the center, take out the screws from the bottom, rotate and tighten the threaded rod with reinforcement rivets with the screws, then rotate the screws with a tool until it is tightened. Then install the telescopic tube and other tubes by rotating and tightening them according to the height you need, and you can use iv transfer pole. You can refer to the instruction manual and installation step by step pictures.