HDMI ARC Audio Extractor with Power Cord

HDMI ARC Audio Extractor & Converter:This HDMI ARC audio extractor allows you to route audio from your ARC-compatible TV directly to optical, RCA (L/R), or 3.5mm headphone outputs. As a dedicated HDMI ARC to optical audio adapter, it solves audio compatibility issues between modern TVs (not compatible with computers!) and home audio systems with ease. Note: Your TV must have an HDMI port marked "ARC"; otherwise, it will not work. Please check if your TV has an "HDMI ARC" port before purchasing. Digital-to-Analog Audio Converter: As a high-performance digital-to-analog audio converter, it supports the conversion of PCM/LPCM digital signals to analog stereo signals. A simple input mode switch allows you to easily switch audio sources.(Note: Supports PCM format only; no Dolby decoding.) Multi-Port Audio Output: This ARC audio extractor supports simultaneous audio output via optical, coaxial, RCA, and 3.5mm headphone jacks. For optimal performance, set the audio output of your TV or source device to PCM/LPCM before use.(Note: Only 3.5mm and RCA output can be controlled by the TV remote supports CEC.The Optical/coaxial outputs cannot be controlled by the TV remote, please adjust the speaker volume manually.) High-Resolution Audio Support:Experience crisp, high-fidelity sound with support for sampling rates up to 192kHz, including 32kHz, 44.1kHz, 48kHz, 96kHz, and 192kHz. The device also accepts 24-bit SPDIF input, ensuring detailed and clear audio reproduction across all connected speakers or headphones. Wide Device Compatibility: Compatible with ARC-enabled HDTVs and standard HDMI devices such as soundbars, amplifiers, Blu-ray players, game consoles, streaming devices. Plug and play setup requires no additional drivers or software. Easy Setup & Troubleshooting Tips:Ensure the power indicator is on and the adapter is properly connected. For ARC input, verify that your TV supports ARC and it's enabled, and always use an HDMI 2.0 cable. If there's no audio or static noise, set the TV audio output to PCM/LPCM. For 5.1 channel issues, check that the audio source is in 5.1 format and set the optical output to "Source Output."